8-possibilities-meshing-process

elements type smoother spacing sources Results
HEX MAP None 0.6 NA ERROR: Entity V.5 can not be mesh on lower entity f.79
0.15 NA f.77
0.1; 1.0; 1.0 NA f.75; f68; f67
Hex
Sub map
NA 1.0; 0.6 NA F67; F62
hex Tet primitive NA 0.6 NA Connectivity for v.5 does not allow meshing using the tetrahedral primitive scheme
hex cooper NA 0.6; 1.0 F.63; 67; 68; 69 = all from 4th ventilating lids F38, 37, 57, 5, 42, 53, 24, 22 is Not appropriate for use as a face to project along. Either it is not sub mapped or the choice of source faces is incorrect
HEX STAIRSTEP NA 1.0; 0.6; 2.0 NA Successfully meshed V.5. Created faceted volume (s). F_volume.6 with mesh volumes = 5564
HEX/wedge cooper NA 0.6 NA F38, 37, 57, 5, 42, 53, 24, 22 is Not appropriate for use as a face to project along. Either it is not sub mapped or the choice of source faces is incorrect

Tet/hybrid hexcore NA 0.6 NA Mesh generated for v.5: mesh volumes = 47457. Contains 16 highly skewed element (EQUISIZE SKEW > 0.97)
Tet/hybrid tgrid na 0.6 NA Mesh generated for v.5: mesh volumes = 51780. Contains 11 highly skewed element (EQUISIZE SKEW > 0.97)

There are three meshing process that success for the geometry....
[1]. Stairstep =mesh volume=5,564.
[2]. Tgrid =mesh volume=51,780.
[3]. Hexcore =mesh volume=47,457.